Fire Safety on Building Sites

Building environments, especially those in a temporary phase, present specific fire hazards due to shifting layouts, relocatable equipment, and scattered workforces. A reliable alerting system is necessary for ensuring all personnel are aware without delay. The Howler line-up, including the radio-based GOLink system, HO units, and site alert models, provides a scalable safety setup to match various site demands.

What Exactly Are HO Alarms?

HO alarms are independent, battery-operated devices used where traditional systems are not viable. Ideal for portable cabins or outbuildings, they require no wiring.

• Loud alarm: Around 102 dB at a metre’s distance.


• Optional strobe: Some models include integrated lights for visibility.


• IP-rated: Many are suited for outdoor use or partially exposed areas.

These alarms provide supplementary coverage where the core alert network may not reach.

The Site-Wide Alert Range

Suitable for mid-sized projects, the Site Alert system can work as standalone or in linked setups of up to 20 units using a simple two-core cable. When set off, all devices in the series respond simultaneously.

• Approx. 100 dB sound level at 1 metre


• Built-in flashing beacon for loud or noisy settings


• Ideal where cabling is straightforward

Going Wireless: Site Alert RF

Where cabling is limited, Site Alert RF links up to 30 units over wireless. It has an open-area range of around 1 km and supports multiple channels for interference avoidance.

Combining wireless and cabled systems is commonly the best strategy for sites with varying structures.

Integrating the GOLink System

The GOLink system serves website as a coordinating hub for large, multi-zone installations, using wireless signals to link alarms.

GOLink Interface Connections

Through the Interface Unit, it’s possible to tie into turnstiles, autodiallers, CCTV, and other site safety components. Up to 127 points can connect across a site-wide network.

First Aid Callouts

Certain models (e.g. H05 GOLink) include a first aid button alongside the fire alert. The first aid function quietly notifies the control team, allowing medical needs to be flagged without general evacuation.

How to Deploy Effectively

• Zone assessment: Identify where alarms need to be noticeable, dividing the site into manageable sectors.


• Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or temporary areas.


• Set a maintenance routine: Schedule weekly testing and check battery levels.


• Training & signage: Ensure directions are posted and team members know how to respond to alerts.

FAQs

How many devices can be wired together?

Up to 20 Site Alert units can be connected using 2-core cable.

What’s the wireless range of Site Alert RF?

Approx. 1 km in open-air conditions, though physical obstructions can reduce range.

Do HO alarms need a base station?

No, HO models are self-sufficient and do not require central control.

Is third-party integration supported?

Yes, external systems can be connected via the GOLink Interface Unit.

Purpose of switch protection?

It reduces false alarms by sounding a warning if tampered with before activation.

Can both cabled and RF alarms work together?

Yes, the GOLink system allows wired and wireless units to operate on the same network.

Will first aid alerts trigger full alarms?

No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.

Wrap-up

Whether your project involves one zone or several, Howler alarms—HO, GOLink, and Site Alert—offer solutions that adapt to varying conditions. For product information, planning tools or live demos, visit the Howler section on FireSense.